Monday, July 14, 2008

Precautions When Operating Milling Machine

Precaution is meant by a measure taken in advance to avoid danger in order to secure good result. When we handling a machine, precautions have to be taken in order to secure good result of the workpiece and personal safety. The precautions when operating milling machine as shown below:

1.) Avoid performing a machining operation on the milling machine until you are thoroughly familiar with how it should be done.

2.) Some materials that are machined produce chips, dust-, and fumes that are dangerous to your health. NEVER machine materials that contain asbestos, Fiberglass, beryllium, and beryllium copper unless you are fully aware of the precautions that must be taken.

3.) Maintain cutting fluids properly. Discard them when they become rancid or contaminated.

4.) Be sure the cutter rotates in the proper direction. Expensive cutters can be quickly ruined.

5.) Carefully store milling cutters, arbors, collets, adapters, etc., after each use. They can be damaged if not stored properly.

6.) Never start a cut unless you are sure there is adequate clearance on all moving parts!

7.) Exercise care when handling long sections of metal. Accidentally contacting a light fixture or busbar can cause severe electrical burns and even electrocution!

8.) Carefully read instructions when using the new synthetic oils, solvents, and adhesives. Many of them dangerous if NOT handled correctly.

9.) Use adequate ventilation for jobs where dust and fumes are a hazard. Return oils and solvents to proper storage. Wipe up spilled fluids. Do NOT pour used coolants, oil, solvents, etc., down a drain.


Aliza Jamess said...

cnc milling machine Wonderful illustrated information. I thank you about that. No doubt it will be very useful for my future projects. Would like to see some other posts on the same subject!

Jones Morris said...

It is the rotary table that enables the milling machine to perform turning operations – while the workpiece is turning the cutters can move linearly to cut the outer diameter. Milling + turning is combined into one machine by the rotary table. metal milling machine

PosheSolution s said...

Thanks for sharing the Useful information !
Nebosh course in chennai
Nebosh courses in chennai
Nebosh Course Provider
Nebosh in Chennai

mike jilligan said...

After study just a few of the blog posts on your web site now, and I really like your way of blogging. I bookmarked it to my bookmark web site listing and shall be checking again soon. Pls try my site as properly and let me know what you think. casino play

sumathi s said...

I just needed to record a speedy word to express profound gratitude to you for those magnificent tips and clues you are appearing on this site.
fire and safety course in chennai

Swetha Gauri said...

I feel really happy to have seen your webpage and look forward to so many more entertaining times reading here. Thanks once more for all the details.
offshore safety course in chennai